Prepare the foundation step 1.
Making your own stackable concrete pavers retaining wall.
For this project you will need.
Whatever your choice do ensure that you have lots of molds.
Place a perforated drainage pipe 2 inches up from ground.
Stacked stone concrete mold used https amzn to 2leczrs for more details o.
For row one knock off the flanges with a hammer and chisel so the.
Dig for the first row of block.
Molds for cement pavers are available in most large hardware stores.
For dry stack walls the base should be as wide as the wall is tall.
After you finish the first course fill the space between your retaining wall and.
If needed reposition it using additional.
The exact depth of the.
Remember one mold makes only one cement paver and it will take at least two weeks before your cement paver is ready for use.
To bury the first row.
However if you want you can even make your own molds out of plywood.
If you have the option it can be easier to excavate and lay the lowest course before excavating the trench for the next step.
With the layout marked you can begin digging the trench.
For this 18 inch high wall the footing should be at least 18 inches wide.
In this video i showed how you can make your own concrete stacked stone at home.
If stacking pavers to retain soil and the wall is more than two feet high backfill a couple inches directly behind the wall with gravel.
Use a hand or power tamper to level the base.
Continue laying your first course of blocks making sure to check that every block is level.
Position your first block and use a standard level to make sure it s even.
Excavate to a depth of 6 inches along the entire base of the stone retaining wall using the string marker as a guide.
For a stacked block retaining wall that s no higher than four feet a trench filled with three inches of crushed rock will help keep the wall from shifting and settling.